This is my favorite way to make custom scrunchies for my very fine hair. Cut a 22 by 3 rectangle.
Fold the ends of the tube and put one end inside the other.
How to make a scrunchie with a hair tie no sew. Place your hair tie over it roughly in the middle. Select your fabric i have used a pastel stripe with gold metallic dots soft poly. Use pins to hold the fabric in place.
Watch this super easy tutorial on how to make a scrunchie. Lay the right side of the matching pattern piece on top of the tape and iron for 10 15 seconds. The no sew diy hair scrunchie measurements include 2 pieces of stripe pattern and 2 pieces of dotted pattern that are 2 x 6.
If you only want a plain scrunchie with no tie tail then a rectangle 40 by 8 10 cms is all you need. Thread the pencil through the scrunchie tube and once the elastic is in the tube remove the pencil and the tape. Heres what it looks like with pins all the way around.
Turn the tube inside out. The hair tie is hidden inside the scrunchie. Sew at 5.
Otherwise you can get you free pattern at the bottom of the page. Match up the folded edges so the hair tie is inside the fabric. Repeat along both sides.
How to make a scrunchie with a hair tie step by step. Cut 2 pieces of iron on tape that are 6 long and lay on the right side of each piece. Use any and all of your scraps to make the most adorable accessories.
Make sure the tube doesnt twist. Fold the strip in the middle with the right side inside. Fold the cut ends along the length by towards the wrong side.
Same as the other two options cut your scrap fabric to measure 4 wide by 18 long. Place the hair tie between the strip. How to make a scrunchie no sew.
Press in place using a hot iron. Iron the tape for 2 seconds on all sides. Cut out your rectangle pieces.
Tie the elastic in a knot. Diy scrunchies are a great way to use up some of your fabric scraps and only take a few minutes to. 7 close by hand or machine with an invisible seam.
Slide the knot to the opposite side of the fabric opening. Cut a small piece of tape to fit around the edge of the opening. Apply a thin bead of glue along the folded edge working small sections at a time.